A One-Gallon Recipe – Pixie's Pocket (2024)

I can tell that it is truly summertime when I can gather large handfuls of blackberries from the wild brambles that surround the edges of our property. Over the past two weeks, I’ve had blackberries with chèvre on toast and devoured by the handful, but the rest of the harvest has been frozen a handful at a time for use later in the winter. Maybe I will turn those into blackberry syrup or cook it down to make a small batch of jam…we’ll see!

My hedgerow harvests suffice for those mini projects, but sometimes I have to visit one of my secret patches where I can pick a whole mess o’berries with abandon!

A One-Gallon Recipe – Pixie's Pocket (1)

So, I woke up early yesterday morning and went to a work site with my husband. While he mowed beautiful lines into the sweet-smelling, dew-covered grass, I walked the perimeter of the land and gathered the wild blackberries that peppered the rolling creeksides. After an hour and a half of work, I had earned arm scratches, purple fingers, and one hell of an appetite to go along with the two pounds or so of fat, ripe blackberries that I had gathered.

We brought them home, rinsed the berries off, and then I began the process of making a one-gallon batch of blackberry mead! This is also known as a melomel, a mead made with fruit.

A One-Gallon Recipe – Pixie's Pocket (2)

Blackberry Mead (1 Gallon Recipe)

  • 3 lbs of wildflower honey
  • 2-3 lbs of blackberries
  • 1 or 2 whole allspice seeds, cracked
  • 1 or 2 whole cloves, crushed
  • 1/2 of a lemon, chopped
  • 1/2 packet of Lalvin D-47 or other brewing yeast (but 2 grams of bread yeast will work in a pinch!)

Graba large stockpot and heat just under 1 gallon of water to just about boiling. Throw in the allspice berry, clove, and lemon whileit heats.

While the water isheating, sanitize a 2-gallon brewing bucket and rinse it well. Add the berries to the bucket, ideally in a mesh bag, but it’s fine if you toss them in. Use a potato masher or similar tool to mash the berries up and help them to release their juices.

Once the water is hot, turn off the stove and remove the stockpot from the heat. Let it cool for just about 10 or 15 minutes and then add the honey, stirring it well to blend it. If it is unfiltered, raw honey, you may get a foam on the surface, which can be removed if you wish. I usually don’t bother.

Pourthe hot honey water (also called the must) over the berries and give it a good couple of stirs. If your brewing bucket has a lid with an airlock, use that. Otherwise, you can cover the bucket witha towel and tie it down to allow the must to cool and to keep curious flies and ants out of your delicious brew!

Allowthe must to cool overnight, or until it is around 80 degrees. Add youryeast of choice to the room-temperature bucket. I often use Lalvin D-47 for meads, or sometimes a sweet mead yeast. Pitching the yeast is a beautiful experience. Sprinkle it on the top of the mead and give it a stir with a clean spoon to add oxygen and get the yeast mixed in. Re-cover the bucket and let the mixture do its magic in the bucketfor a couple of days.

A One-Gallon Recipe – Pixie's Pocket (3)

A few days later…

Waiting is the hard part! You have to let the bucket full of berries, spices, and honey water bubble away for a while. Pick up the bucket and give it a gentle swish every day. You’ll hear the bubbles popping as you do so, and it smells amazing!You can also give your mead a daily stirring with a clean spoon. This helps to add oxygen and breaking the surface of the mead helps to avoid mold growth on the fruit.

A One-Gallon Recipe – Pixie's Pocket (4)

It was a joy to stir while guests were over. People who have never before brewed really observe the fermentation process with wonder in their eyes. It serves to remind me that I am not only a wino with a DIY complex, but a high magician, a witch, and an alchemist. Poof! Alcohol.

For my first batch, I waited seven days. The sweet, fizzy smell in the mead-brewing corner of the kitchen was delightful – not too yeasty or cloyingly sweet.

A One-Gallon Recipe – Pixie's Pocket (5)

When you’ve decided the mash is ready, sanitize a one-gallon glass jug, a strainer, a funnel, an airlock, and a bung. It helps if you line the strainer with a layer or two of cheesecloth to catch the smaller floaty bits. Strain the mead into the glass jug, and enjoy the show…what a feast for the senses! The color is magnificent, the smell is divine, and once we funneled the brew into the carboy and sampled what was left over, the taste was absolutely thrilling!

Top off the carboy with an airlock and bung. It won’t take long for the yeast to kick back into action.I don’t know when this mead will be ready…but I’ll guess by the slowing down of the bubbling in the airlock and rising up the sides of the jug. You can also look for other signs, like the opacity of the mead itself clearing as the yeast dies and settles to the bottom. If you can read a newspaper through your mead, it’s ready to bottle!

A One-Gallon Recipe – Pixie's Pocket (6)

Once your mead is bottled, age it for at least a few months before enjoying it. This brew is delicious; rich, sweet, and full of tangy, bittersweet berry flavor from the wild fruit. I’ve made a batch every year since!

I’ve also made a few more one-gallon batches of wines and meads, and you can see more about my technique and recipes there!

A One-Gallon Recipe – Pixie's Pocket (2024)

FAQs

How many grams of yeast for 1 gallon of mead? ›

I recommend pitching 2 grams per gallon when using dry wine yeast. For best results, rehydrate with 1.25gram of Goferm per gram of yeast.

What is the best honey for mead? ›

So, out of the 300 types, what is the best honey for mead? Meaderies, whether commercial or homebased, agree that honey harvested locally is the best kind. As for a specific kind of honey, orange blossom came out as a highly popular one because of its consistent flavor as well as citrusy taste.

What is the best yeast for mead? ›

Lalvin D-47

This white wine yeast is the primary choice for many mead makers. It ferments at a moderate to fast pace with little foaming and is good for medium to dry meads. It tends to accentuate the honey characteristics so it is a good choice for traditional varietal mead.

How long should you age mead? ›

Traditional meads usually require six months to 2 years for the flavors to mellow and smooth and any off flavors to diminish. Melomels or fruit meads can take six months to 5 years for the flavors to fully integrate and the tannins and acids to mellow. Metheglin or spiced meads are quicker, six months to a year.

How much dry yeast for 1 gallon batch? ›

That being said, for 1 gallon of beer you can usually get away with half a package of dry yeast (11g/2 = 5.5g ~ 5g), that's a pitch rate of 1cells / mL / °P, which is usually what you should aim for.

Can you use too much yeast in mead? ›

It is possible to add too much yeast, but that usually takes on the order of 10 to 20 times more than the recommended amount, so using one packet designed for a 5 gallon batch in a 1 gallon batch is not an issue. In general, more yeast is actually better, at least at first.

How much honey do I need for 1 gallon of mead? ›

Use 1.5 to 5 pounds of honey per gallon, depending on your target for residual sweetness and alcohol content. The more honey, the more residual sweetness and the greater potential for a high, final alcohol content.

Can you add too much honey to mead? ›

In answer to your question, you can use too much honey. Somewhere above 4 1/2 pounds per gallon, you get into territory that is very tough for yeast, and many will stall before fermentation is complete. When above 5 pounds per gallon (above a gravity of 1.200 you reach a point where most yeast can't even start.

Can I use supermarket honey for mead? ›

"Can I use supermarket filtered, pasteurized, bulk honey?" Sure, but for three or four dullars more, you can use a raw, varietal honey such as sage, or raspberry, which will impart a much-more desirable flavor and aroma to your product.

What did Vikings use for yeast in mead? ›

Prior to modern day cultivated yeast production, Vikings would have been limited to the wild yeasts that are found all over the environment.

Can I use raw honey for mead? ›

Raw honey is an excellent choice for making mead, because it's totally unpasteurized, which means the honey has not been heated in any way. This allows the delicate flavor to remain intact, because it hasn't been destroyed by any kind of heating process.

What is the best acid for mead? ›

First thing to do when the normal fermentation has ceased you will need to add Citric, Tartaric, Malic acid or Acid Blend. They are used to adjust your meads mouth feel. There should be not be a mouthwatering or a grape skin type puckering on the inside cheeks when correct.

Can you drink mead right after fermentation? ›

Also, while most homebrew beers are quite acceptably tasty almost immediately after the primary fermentation, mead takes much, much longer — 6 months to a year — to mature to a flavor that mead brewers and aficionados find acceptable and might be aged for even longer by serious mead homebrewers.

Can you drink 20 year old mead? ›

However, be sure to save some bottles for future age sampling! I have a few 20+ year old meads that are still good; one is OK and not getting better, 1 is really good and still improving, and 1 bottle left of a 3rd that was so good the last time I tried that I don't know when I will open it.

How long to leave oak chips in mead? ›

A simple way to make using oak easier is to tie the oak up in a small piece of sanitized cheesecloth, weighted with a couple of marbles. This way, the racking will be far easier. Leave the Mead to sit on the oak for 1½ to 2 months, then begin to sample the Mead every week or so.

How much yeast do I need for mead? ›

Use acid blend on the back side for accuracy of final titrations. The other problems for homebrewers are lack of nutrients and underpitching of yeast. Both of these lead to stuck fermentations. I recommend 1-2 grams of nutrient per liter of must and 10 grams of yeast per 5-6 gallon batch.

How much active dry yeast per gallon of mead? ›

I pitched 5 grams — or a packet — of each yeast per gallon, and let nature take its course. Each of the meads was happily fermenting along within a few hours, and all of them finished as expected in about two weeks.

How much yeast should I use per gallon? ›

Typical usage rate for yeast is 1 gm / gallon of juice, but being a little short or a little long is not a problem, as yeast reproduces to reach a number at which fermentation takes place. Being slightly long on usage amount simply gets the fermentation count up that much faster.

How much yeast do I add to a gallon of cider? ›

Add yeast and nutrients: Add ½ teaspoon (~2 grams) of yeast nutrient (Fermaid K) per gallon of juice. Carefully swirl to mix. Add ¼ teaspoon (~1 gram) dry yeast per gallon of juice by sprinkling across the surface of the juice. After a few minutes, gently swirl to mix.

Top Articles
Latest Posts
Article information

Author: Jonah Leffler

Last Updated:

Views: 6162

Rating: 4.4 / 5 (65 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Jonah Leffler

Birthday: 1997-10-27

Address: 8987 Kieth Ports, Luettgenland, CT 54657-9808

Phone: +2611128251586

Job: Mining Supervisor

Hobby: Worldbuilding, Electronics, Amateur radio, Skiing, Cycling, Jogging, Taxidermy

Introduction: My name is Jonah Leffler, I am a determined, faithful, outstanding, inexpensive, cheerful, determined, smiling person who loves writing and wants to share my knowledge and understanding with you.